Whidbey Water Filters

Mobile: (206) 324-5055
Home: (360) 730-7992

petrich@whidbey.com

Aqua Alternatives
Itemized 2014 Price Break-Down
Complete Ozone System


Listed here are specific prices for a high-end system, a tannin system, and a low-end system.

HIGH-QUALITY COMPLETE SYSTEM

A ball-park estimate for a complete ozone system is $6300.
Below is a specific break-down of costs for equipment, labor, shipping, and tax.

QTY

MATERIALS

PRICE

1

22HD Ozone Unit, 110v

$1300.00

1

.5 hp SS Jet Pump, 110v

$900.00

1

#5 Venturi

$130.00

1

1” Closure

$50.00

1

Posi-Vent, 110v

$150.00

1

Off-Gas Tank, 15"x15"x58”, with riser, bracket & screw kit

$480.00

1

11"x11"x56" media tank, riser & basket

$330.00

1

2510 Backwash Valve

$790.00

1

SP10 filter media ($80/52-lb. bag)

$90.00

1 Birm filter media $170.00

22

Gravel ($1/pound: 25 lbs.)

$25.00

1

Flow Switch with 110v relay wire

$300.00

1

Misc. plumbing parts (approximate)

$200.00

  Subtotal for equipment $4915.00

 

UPS: shipping charge

$325.00

 

TOTAL (excluding labor & tax)

$5240.00

Labor can take anywhere from 6-12 hours, @ $60/hour.  Assume 10 hours = $600.
Whidbey tax is currently 8.7%, which would amount to somewhere around $450.

---> The total for this particular estimate is $6290.00. <---

While no water system is totally maintenance-free, this is virtually self-operating and rarely requires maintenance.

When designing a water treatment system there are several variables:
labor hours, miscellaneous parts, tax, and whether or not additional parts are required,
such as tannin removal, water softener, arsenic filter, pH stabilizer, etc.  
It is always best to have a water analysis done before ordering a system.

IF TANNIN IS PRESENT:


                Tannin Removal

 

2510 mechanical softener valve   

$850

15"x15"x58" tank                  

$420

Brine solution tank

$170

Tannin resin

$640

Softener resin

$190

Gravel

$44

TOTAL (excluding shipping, tax, labor, misc.)

$2314

Add to this labor, shipping, tax, and miscellaneous parts, for an approximate total of $2500.
Combine a tannin system with a complete ozone system, the total could be $8800.

 

LOWEST PRICE

Below is an estimate for a low-end system, assuming two people, <2 parts iron, no tannin, and normal pH.

QTY

MATERIALS

PRICE

1

S-1 Ozone Unit, 110v

$1000.00

1

Ozone compressor pump

$930.00

1 Check valve assembly $120.00

1

Posi-vent 110v kit

$130.00

1

1” Closure

$50.00

1

Off-Gas Tank, 10”x54”, with riser

$310.00

1

Media Tank, 10”x54”, with riser & basket

$310.00

1

2510 Backwash Valve

$790.00

2

SP10 filter media ($90/52-lb. bag)

$180.00

22

Gravel ($1/pound: 22 lbs.)

$22.00

1

Flow Switch with 110v relay wire

$300.00

1

Misc. plumbing parts (approximate)

$150.00

  Subtotal for equipment $4292.00

 

UPS: shipping charge

$325.00

 

TOTAL (excluding labor & tax)

$4617.00

Add maybe $400 labor, plus tax, and the total is approximately $5000.

(Keep in mind that the long-term cost of using an ozone compressor pump instead of a jet pump
is that the pump must be re-built every two or three years, at a cost of around $400 each time.)

 

Aqua Alternatives
Dean Petrich
2131 Middle Drive
Freeland, WA 98249-9516
Desk: (360) 730-7992
Mobile: (206) 324-5055
E-Mail: petrich@whidbey.com
http://www.enviroalternatives.com